Back at it! Haven’t had a lot of time to work on the plane the past several weeks but now that Grayson is 4 weeks old, I’m able to sneak out to the garage for an hour or two here and there. Dad came to town to meet Grayson so we were able to spend a few hours working as well.

I have now completed both left and right flaps. Don’t have a lot of pictures of the right one since it’s basically identical to the left. Once again, the hardest part was driving the rivets on the bottom skin to the spar.

It requires you to reach way down into the flap between the two skins to hold the bucking bar. Tungsten is a must. I used a couple of 1 inch thick pieces of wood to hold the skins apart a little. I worked one bay at a time with pieces of wood on each side.

So here’s a picture of all of the progress to date. Wings with top skins on, outboard leading edges below, and flaps on the shelf on top.

Here’s the stored flaps. I put styrofoam between them and wrapped them with saran wrap before putting them on a shelf.